In February 2026, our team at Prime WallCovering installed the wallcoverings for the remodel of the Dave & Buster’s in Miami, inside Dolphin Mall. It was the same design family we had just installed for Dave & Buster’s Jacksonville: a lighter, more modern look built on retro geometric murals, printed concrete textures, halftone gradients and bold polka dots. Our crew finished every wall in 15 days, working overnight.
The venue reopened on May 8, 2026. What Now Miami reported a brighter design, a sports bar rebuilt around a 40-foot screen and more than 30 HDTVs, and new games, and WSVN 7News described the whole front of the house, from the entrance to the game room, as brand new. Here is a look at the walls in that new front of house and how we installed them.
Project snapshot
- Venue
- Dave & Buster’s Miami · Dolphin Mall, 11481 NW 12th St, Miami, FL 33172
- Timeline
- February 2026 · 15 days on site
- Scope
- Retro geometric mural frieze, concrete-texture and halftone gradient walls, polka-dot feature walls, partition walls
- Material
- Custom-printed commercial wallcovering, made to order for each wall
- Adhesive
- Roman PRO-838 Heavy Duty Clear, a water-based commercial adhesive from Sherwin-Williams
- Spaces
- Sports bar and dining areas, double-height dining room, partition walls
- Schedule
- Overnight shifts, to stay clear of daytime operations and the other trades
A retro geometric frieze in the dining room
The main dining room is crowned by a mid-century geometric mural in cocoa, terracotta orange and white: circles, quarter-circles and triangles running as a frieze along the top of the walls. A pattern made of circles is unforgiving, because a shape that doesn’t close at a seam reads as a mistake from across the room. Every panel was numbered and dry-laid, and every seam was matched to the artwork before the adhesive set.

Polka dots and a concrete diagonal
Two of the boldest walls use a dark teal polka-dot wallcovering above cream wainscot. On a pattern this regular, the eye catches any drift immediately, so the dot rows had to stay perfectly level and plumb from floor to ceiling, and the seams had to disappear into the grid. On a neighboring wall, a light concrete-texture panel is cut on a long diagonal against the plain wall, an edge that has to stay dead straight across several drops.


Halftone gradients along the long walls
The long dining walls carry a printed halftone pattern: uniform dots that grow and shrink along a diagonal, fading from light green-gray into plain slate. The gradient only works if the dot sizes flow smoothly from one panel to the next, so the layout was planned wall by wall to keep the diagonal continuous across every seam.

Double-height walls and partitions
The tallest wall in the venue is a double-height column where the halftone dots dissolve into a concrete texture, a single gradient that runs from the dining tables up toward the ceiling. Freestanding half-height partitions carry the same family of graphics, a dark slate that breaks into halftone dots and then light concrete, so both faces of each partition had to line up with the room around them.



Material, adhesive and an overnight schedule
Every graphic was a custom-printed commercial wallcovering, made to order for its exact wall. Printed commercial wallcovering is the right choice for a busy restaurant and arcade: it is durable, cleanable and holds up to the bumps and constant cleaning a high-traffic venue sees every day.
As in Jacksonville, we hung it with Roman PRO-838 Heavy Duty Clear, a water-based, commercial-grade wallcovering adhesive we bought from Sherwin-Williams. A water-based adhesive gives good open time to slide and match large printed panels, cleans up easily and keeps odor low, which matters in a venue that has to be ready for guests and other crews the next morning.
The whole install took 15 days in February 2026, and our crew worked overnight shifts. Each night we closed off the work zone, protected floors and furniture, installed, and left the area clean and ready for the day.
How we install large-format commercial wallcovering
- Prep first. Repair, skim coat where needed and prime, so printed patterns look flat under accent lighting.
- Layout before adhesive. Numbered panels are dry-laid and checked against the artwork and the wall dimensions.
- Reference lines on every wall. Plumb and level lines keep dots, circles and diagonals true across long runs.
- Seams matched to the art. Every seam is checked by eye at full scale before the adhesive sets.
- Clean cuts at every edge. Ceilings, wainscot, outlets, partitions and door frames get straight, tight trims.
- Phased, tidy work. We work zone by zone and leave each area clean at the end of every shift.
Want to see a similar project? Read about the Dave & Buster’s Jacksonville wallcovering install, with lettering walls, disco-ball murals and event rooms, or our textured wallcovering at LongHorn Steakhouse in Weldon, NC.
Visiting Dave & Buster’s Miami
You can see the finished walls in person at Dave & Buster’s inside Dolphin Mall, 11481 NW 12th Street, near the Florida Turnpike and SR 836 in west Miami-Dade. For more things to do in the area, see Greater Miami & Miami Beach.
Planning a restaurant or venue remodel?
Prime WallCovering installs commercial wallcovering for restaurants, entertainment venues, hotels and offices across Florida. Learn more about our commercial wallcovering services, call or text (954) 695-3191, or request a commercial bid online.
Photos by Prime WallCovering, professionally retouched and styled for publication. Dave & Buster’s is a registered trademark of Dave & Buster’s, Inc. This article describes our wallcovering installation work on the project and does not imply endorsement by Dave & Buster’s or Dolphin Mall.
